Underground and Pillar hydrants (CPR)This certificate of constancy of performance includes both the underground fire hydrants as the pillar hydrants that are intended for firefighting purposes.
Rubber, investigation and prediction of service lifeThe costs for the repair or exchange of a critical rubber part can be much higher than the initial costs of the rubber part itself. In that case it very profitable to know the expected service life of the specific rubber product beforehand.
Water reducing valves and combination water pressure reducing valves (BRL-K14004)This evaluation guideline specifies the requirements for water reducing valves and combination water pressure reducing valves of nominal size DN 8 to DN 100 for inlet pressures that not exceed 1.600 kPa and a temperature that does not exceed 30°C ...
Operation Clean Sweep (OCS) Certification SchemeIn 2020, Plastics Europe, the association representing plastics manufacturers in Europe and EuPC, the association of European Plastics Converters committed to jointly develop an OCS Europe certification scheme aimed at controlling and documenting complian...
K21045 SCP01 Fire extinguishing generators based on the extinguishing medium nitrogenThe specific certification program ‘SCP01 N2 Generators’ focuses on fire suppression generators that use nitrogen as the extinguishing agent, also referred to as nitrogen generators based on a solid condensed compound. SCP01 is conducted under the TIC sch...
Test laboratory Sanitary AppliancesKiwa makes quality visible As a supplier, buyer, inspector and consumer you need and want confidence. Confidence in the quality of materials and products used in (drinking) water installations and in its manufacturing. Kiwa will make the quality o...
Product inspectionsKiwa experts | third party product inspections With product inspections a third party inspects the products and, if agreed, takes samples for testing.
Sealing material for metallic threaded joints. Part 1: anaerobic jointing compoundsSealing material for metallic threaded joints. Part 1: anaerobic jointing compounds AR 31-1
Sealing materials for metallic threaded joints. Part 2: Non-hardening jointing compoundsSealing materials for metallic threaded joints. Part 2: Non-hardening jointing compounds AR 31-2
flustix Certification Schemeflustix certification is a certification scheme provided by the flustix GmbH, a German-based company specializing in certifications that independently test and verify the plastic sustainability of goods, products, semi-finished products and packaging with...
Prepare for your certification with a pre-audit/GAP analysis by KiwaAre you planning to certify your organization according to a specific standard but unsure where to start? Or have you already implemented a management system in line with, for example, ISO 9001, ISO 27001, or ISO 14001, but you're uncertain if it fully me...
GRASPGRASP is the acronym for “GLOBALGAP Risk Assessment on Social Practices”. The GRASP module is a tool helping producers to vouch for their compliance with international and national employment legislation. GRASP Assessments are not complete corpora...
SERMI certification Remote Service Supplier (RSS) and one employee (RSSe)Start your certification here if you provide remote services related to security-related parts of vehicles. For this, you need to apply for at least a SERMI certificate for your company and one employee, also called Remote Service Supplier (RSS) and Remot...
SERMI certification Independent Operator (IO) and one employee (IOe)Start your certification here if you, as a car, body repair or motorhome company, work on security-related parts of vehicles. To do so, you need to apply for at least a SERMI certificate for your company and one mechanic, also called Independent Operator ...
BRL K17201 for the Kiwa process certificate for Renovation of drinking water piping systems – Part 1 and 2(Drinking) water is one of our basic necessities. It is therefore important that transport is properly arranged. You can have your renovated drinking water pipe system certified. Are you involved in the production and installation of underground renovatio...
Flexible hose assembliesThis approval requirement describes the requirements with regard to flexible hose assemblies for use in installations for natural gas with a pressure of no more than 200 mbar in accordance with the NPR 3378-11 Code of Practice
INCERT SchemeWhen you want to gain market access to the Belgium market you need to acquire the INCERT mark for your products in order to ensure your clients of the high quality standards for these product or services. INCERT is a quality mark for products and services...
Ceramic Sanitary AppliancesThe product group Ceramic Sanitary Appliances offers you certification possibilities for a range of ceramic sanitary appliances.The evaluation guidelines (BRL-K) for ceramic sanitary appliances also cover the corresponding European Standards. The ...